- Product List
- packing machine
- packing machine
- sealing machine
- sealing machine
- filling machine
- filling machine
- strapping machine
- strapping machine
- color sorter
- color sorter
- Contact
-
Phone：0371-63738057/63738067
Fax：0371-63738097
E-mail：nice@nicemachinery.com
Address：Industrial Park in Zhengzhou Jinshui songzhai
Zip：450000
Contact：Mr. Xu
- Product show
-
-
Household vacuum packaging machine maintenance
Household vacuum packaging machine for its small and convenient, safe, reliable, beautiful and so loved by the majority of users. But we use in daily process must be
Note that some proper operation.
1, vacuum packaging machine should be at a temperature -10 ℃ -50 ℃, relative humidity less than 85%, non-corrosive gases in ambient air, no dust, no explosive danger
Environment. The same as strapping and shrink machine, the vacuum packaging machine for three-phase 380V power supply.
2, vacuum pump for the vacuum packaging machine to ensure the normal operation, vacuum pump motor does not allow reverse. Should always check the oil level, the normal oil 1/2-3/4 at the oil window (not
Can exceed), when the vacuum pump in water or oil color black, the new oil should be replaced at this time (generally continuously replaced once a month or two, using a gas or vacuum #
30 # gasoline, oil can).
3, the heating section, silicone strips to keep clean and not stick a foreign body, so as not to affect the sealing quality.
4, heating rods, on the second floor under the heating plate is insulated from the effect of viscous paste, should be promptly replaced when damaged, to avoid short circuit.
5, the impurity should always take apart and wash the filter (usually 1-2 months, washed once, debris-like objects such as packaging cleaning time should be shortened.)
6, 2-3 months of continuous work should open the back cover switch 30 on the sliding parts and lubricating the collision block, the heating rod connection on the activities of the Department should be run as the use of fuel
Slippery.
7, vacuum packaging machine in the installation must have a reliable grounding device.
8, on decompression, filtering, oil mist triple pieces 24 should always check to ensure that oil mist, oil the cup with oil (sewing machine oil), filter cup water.
9, the user-owned work and inflatable air gas source, vacuum packaging machine working pressure is set to 0.3MPa, more appropriate, no special circumstances do not regulate too much.
10, vacuum packaging machine in the removal process does not allow inclined position and impact, but can not be tipped over handling.
11, is strictly prohibited under the hand into the heating rods to prevent injuries, cut off the power immediately in emergency situations.
12 hours of work after the first power ventilation, power shutdown after the first expire.
下一篇相关信息：没有了
-
Copyright：Knight Printing Machinery Co., Ltd. Henan Address：Industrial Park in Zhengzhou Jinshui songzhai
Phone：0371-63738057/63738067E-mail: nice@nicemachinery.com Support：Zhengzhou shuangyi Technology
Phone：0371-63738057/63738067E-mail: nice@nicemachinery.com Support：Zhengzhou shuangyi Technology